So, you've already understand the diversity of wallpaper, to decide on the what type of wallpaper is right for you, and you're going to shop for their purchase. During thinking, pick a color and pattern carefully read the label, which must be under the membrane packing. These unpretentious signs will help you learn as much information about the product: water resistance, light resistance and durability. Their careful study will greatly facilitate your work.

When counting the number of rolls needed to take into account the height of rapport (picture) - than it is, the more waste and, consequently, have to buy more rolls. Arrows describe the location of the circuit panels in relation to each other, but a combination of arrows, and zero indicates the possibility of any location. There will also find information on how to remove wallpaper: in dry form or they must be pr-moistened with water.

Sign "consistent material" suggests that there is a material that is suitable for color and pattern to this wallpaper. Also note that the number of wallpaper. On all rolls must be identical, or there might be differences in color.

For smaller rooms suitable bright wallpaper with small figures, they are recommended for dark rooms. Room with windows on the south side is better  light fast Wallpapers saturated colors.

In a large room as would be appropriate wallpaper with rich colors and large patterns. Wallpaper with a vertical pattern visually "raise" the ceiling in the low areas and different ornament will help "expand" the space.

The next step after selecting a wallpaper - it's counting the number of rolls needed. With a width of 0.53 cm and a length of 10.05 square standard roll of just over 5 sq. m.

Thinking about the repair and counting the cost of materials and work, everyone decides for himself: to make repairs yourself or trust the professionals. Again, good if there are skills and abilities to the case, but if they are not observed, would either have to turn to the masters, or learn a trade, even if it is only for repairs in her apartment.

If you're staying on the second option, we offer a theoretical support and professional advice. Independently without difficulty can be glued only corrugated wallpaper. Follow-up paint will hide the small errors made in the process of working with them. And after the second or third dyeing should not be noticeable or more significant drawbacks. Backgrounds with patterns require more attention and care. They should stick cloth for cloth without gaps, combining drawing.

From time to time look at their work - from a distance can be easily seen inaccurate and have the opportunity in time to correct mistakes.

It should be very serious about cutting wallpaper with a pattern. Desktop rolled out on the table face up. Before cutting rapport align the edges of successive panels. To prevent any confusion with the back of them can be numbered in pencil. Paste prepared in advance that the powder had completely dissolved and no lumps. Apply a thick layer of it in the middle of the cloth and then spread to the edges. Fold the cloth so that the paste did not get on the front side and leave on for several minutes.

Overlap pasted wallpaper in a specific sequence so that the butt joints were directed toward the light and that was not visible edge seams. From the right or left of the window, "passed" to the opposite wall and then start to hang the second part of the wall with a window. At least okleivayut section of wall above the window and under it.

During the gluing panels, pay attention to the fact that the next panel is completely overlaps the edge of the previous one.

Wallpaper glue back to back is much easier, because their edges are processed in a factory is absolutely straight. Edge of the blade firmly to the slide is stuck, and align with the previous so that the image are the same. Once you have pasted cloth across the length and starting from mid-smoothed wallpaper brush, handle the seam. Smooth or corrugated roller cloth edge, gradually increasing pressure. With today's "frothy" wallpaper you need to work carefully so as not to damage the image. The speaker on the outside of the paste immediately wipe with a damp cloth. The next difficult stage - it neatly pasted wallpaper around switches and outlets. You can stick around wallpaper Lap previously in the right place to make a cut crosswise on the diagonal, starting from the middle. The hole should be smaller than the switch. Slightly relax the screws box switch or outlet. Surplus wallpaper paste under the cover, carefully push the wallpaper brush or roller for the seams, and then secure the case in the original position. Pr-Switch off the electricity in the apartment.

For pasting window slopes to the right or left of the window, attach the fabric wallpaper, so that part is equal to the depth of the slope, crossed to the window opening. Cut fabric along the top of the bridge, and the protruding part of wrap and stick to the slope. A similar operation is carried out from the opposite side.

Then blooms desired length glued wall above the window opening, the protruding portion is wrapped inside. Small areas in the corners, the remaining open glue suitable in size and pattern pieces of wallpaper. The protruding strip of ground cloth wallpaper wrapped inside, and if necessary put additional glue.

In the corners of the room have a wallpaper so that the edge width of 3 cm came on another wall. If entering the edge of more than 10 cm, the protruding part of the cut to 3 cm, wrapped to the next wall and stick to it the new flag. If you leave the bend of greater width, due to uneven walls it will not be pressed hard.

Cloth protruding over the edge of the wall is recommended neatly cut short - in this case under the overlap will not be sharply defined cutoff line.

Made an incision on the protruding part of the wallpaper the inside corner with an interval of 10 cm to help avoid the tension of the canvas.

If you want to paste over a niche or arch, place the cloth wallpaper so that the edges of the openings were at a distance of 2.5 cm and mark in pencil the line. Then cut protruding portion at a distance of 2.5 cm and wrap inside, and then the wallpaper brush gently press down to the slope of the arch and glue. The interior of the niche pasted strip of wallpaper required width. In order to avoid rapid drying and the formation of drops, the paste is prepared thicker than usual.

During this work, pay attention to the rapport - it must match with the neighboring banners wallpapers. A word of advice: Try to choose a wallpaper with a low rapport that will facilitate you pasting arches and niches.

There is another little trick that will stick wallpaper behind a radiator. One or two of the cloth (if necessary) glued to the wall to the top of the battery and the rest incision length in several places. Each strip is drawn over the heating element and is attached.

These little tips will help you glue wallpaper in the apartment without the help of a professional, which is not so easy to find. After all, the so-called low prices can only offer private traders, who do not always work professionally. And in the case of poor quality work done you have to complain to choose their own masters. In addition, knowing how the end result should look like the work you have to really monitor the implementation of an order or to practice and do all their own hands.